Choosing From The Address Book - Kyocera ECOSYS M3540dn Operation Manual

Sending Faxes > Methods For Entering the Destination
4

Choosing from the Address Book

Select a destination registered in the Address Book.
NOTE
For more information about how to register destinations in the Address Book, refer to
Book) on page 2-14.
1
2
Item
Sub Address Set this to transmit using a Sub Address. For details, refer to
Transmission on page
Encrypted TX This is set when using encrypted transmission to send the data. For details, refer
to Using the Encrypted Transmission on page
TX Start Speed This is set to change the transmission start speed. Select the speed from 33,600
bps, 14,400 bps, and 9,600 bps.
Normally the default setting should be used.
ECM ECM is a communication mode specified by the ITU-T (International
Telecommunication Union) that retransmits data when an error occurs. Fax
machines that have ECM mode check for errors as they communicate,
preventing distortion of the image due to noise on the line and other conditions.
3
Press the [OK] key.
Press the [OK] key.
NOTE
When On is selected in Check New Dest., a confirmation screen is displayed for the entered
FAX number. Re-enter the same FAX number and press [OK]. For details, refer to Check
New Dest. in the Operation Guide for the machine.
To send to multiple destinations, enter the next fax number and press the [OK] key. You can
send to as many as 100 destinations at once.
Press the [FAX] key.
Press the [Address
5-20.
NOTE
Book] key.
3-13
Description
5-32.
Adding a Destination (Address
Sub Address