Kyocera ECOSYS M3540dn Operation Manual page 30

Before Using the Fax Machine > Registering Destinations in the Address Book
6
3
Enter the fax number.
FAX No. Entry:
0123456789
Detail
Enter the fax number of the receiving system using the numeric keys.
Up to 32 digits can be entered as the fax number of the receiving system.
Pressing the [Address Recall/Pause] key adds about three seconds of waiting time during
dialing. For example, when dialing the receiving system on an external line, you can use this
method to insert a pause before resuming dialing after you dial a specific number.
Select transmission settings.
Sub address communication, encrypted transmission, transmission start speed and ECM can
be set.
1
Press [Detail].
FAX No. Entry:
0123456789
Detail
2
Press [] or [] to select the item to change the settings for and then press [Edit] or
[Change].
FAX Detail:
Sub Address:
1234567890
Edit
Item
Sub Address Set this to transmit using a Sub Address. For details, refer to
Transmission on page
Encrypted TX This is set when using encrypted transmission to send the data. For details, refer
to Using the Encrypted Transmission on page
TX Start Speed This is set to change the transmission start speed. Select the speed from 33,600
bps, 14,400 bps, and 9,600 bps.
Normally the default setting should be used.
ECM ECM is a communication mode specified by the ITU-T (International
Telecommunication Union) that retransmits data when an error occurs. Fax
machines that have ECM mode check for errors as they communicate,
preventing distortion of the image due to noise on the line and other conditions.
3
Press the [OK] key.
1/ 6
5-20.
NOTE
2-16
Description
5-32.
Sub Address