Panasonic UF-490 Service Manual page 35

(14)
(17)
(15)
(16)
(18)
(10)
(11)
(12)
(13)
(10) 2 Screws (23).
(11) Remove the Fuser Lamp (314).
Caution:
Do not Touch the glass portion of the Fuser
Lamp with bare hands. Grease from finger
prints will shorten its life cycle, use isopropyl
alcohol to clean finger prints.
Note:
When re-installing the Fuser Lamp, insert the end
of the Lamp with the arrow mark first.
(12) 2 Screws (19).
(13) Remove the Fuser Cover Assembly (305).
(14) 1 Screw (4B).
(15) Disconnect and remove the Thermistor
Assembly (307).
(16) Lift the Paper Exit Actuator (306).
(17) 1 Screw (19).
(18) Remove the SNSE PC Board (704).
35