2.2.5.
Stopper Latch, Upper TX Chassis Assembly, Top Cover, Stopper Latch 2, Lower TX
Chassis Assembly, Stamp Cover, Solenoid Assembly, Scanning Roller Assembly,
Scanning Roller, CIS Assembly, Gear Cover, Gear Shaft, ADF Roller
(1)
(3)
(2)
(4)
(5)
(8)
(9)
(12)
(14)
(6)
(4)
(5)
<Specific Countries Only>
(10)
(11)
(10) 1 Screw (19).
(11) Remove the Stamp Solenoid Assembly (227).
(12) Open the Lower TX Chassis Assembly (215).
(13) Remove the Stopper Latch 2 (237).
(14) Disconnect the CIS Harness (1003).
(15) Remove the Lower TX Chassis Assembly
(15)
(13)
25
(1) Open the Upper TX Chassis Assembly (201).
(2) Remove the Stopper Latch (210).
(3) Remove the Upper TX Chassis Assembly
(201).
(4) 2 Silver Screws (B1).
(5) 2 Screws (19).
(6) Remove the Top Cover (117).
(7) Open the Lower TX Chassis Assembly (215).
(8) 1 Screw (19).
(9) Remove the Stamp Cover (226).
(215).