5.1.5.3.
Shading Adjust
This Service Mode is used to adjust shading of the CIS Scanner, when the CIS Unit is replaced or the
Scanning Image is dirty.
Step
1
Standby
2
Press "FUNCTION" and then "7".
3
Press "MONITOR" four times, then press "*".
4
Press "5".
5
Press "6" or
use "V" or "/\ " to select the Adjust Shading mode.
6
Set the White 10 inches (254 mm) wide blank original
in the ADF.
7
Press "START".
8
The original feed into the scanner and exit out when
the adjustment is completed.
9
Press "STOP" twice to return to standby.
Service Mode 5
Operation or Unit Condition
149
LCD Display
OCT-12 10:58 00%
SET MODE
(1-8)
SERVICE MODE
SCANNER LED TEST
ADJUST SHADING
ADJUST SHADING
* CHECK NOW *
ADJUST SHADING
OCT-12 10:58 00%