Panasonic UF-490 Service Manual page 160

5.1.9. Service Mode 9 (System Maintenance)
5.1.9.1. Overview
This Service Mode is used to maintain and/or update the firmware of the machine. Use the following
procedure for System Maintenance.
Step
1 Standby
2 Press "FUNCTION" and then "7".
3 Press "MONITOR" four times, then press "*".
4 Press "9".
Use "V" or "/\" to scroll to the desired maintenance task.
5 Press "SET" and "START" .
6 After completed, the machine returns to Standby.
No. Maintenance Mode
1 FIRMWARE UPDATE
2 SEND RECEIVED FILE Transfers documents from memory to another fax machine
Service Mode 9
Operation or Unit Condition
System Maintenance Table
Updates the firmware in the machine with the Master Firmware
from the PC. After the firmware is updated, the machine reboots
automatically and returns to standby.
during a fatal printer error.
Description
160
LCD Display
OCT-12 10:58 00%
SET MODE (1-8)
SERVICE MODE
FIRMWARE UPDATE
* IN PROGRESS *
OCT-12 10:58 00%