Panasonic UF-490 Service Manual page 123

No. Parameter
053 Not Used
054
055 BUSY TONE
CHECK
056 DIAL TONE
CHECK
(Except for USA
and Canada)
057 DC LOOP
CHECK
(Except for USA
and Canada)
058 COMM.JRNL
+IMAGE
059 Not Used
060 VERSION
061 TX/RX//PRT/
CPY COUNTER
062 PRINT
COUNTER
063 Not Used
064 SILENT
DETECTION
TIME OUT
065 SILENT
INTEGRATION
TIME
066 RING COUNT
(TAM)
067 Not Used
068 NYSE FAX
FORWARD
069 NYSE LOCAL
PRINT
Function Parameter Table
Selections
1 = Off
2 = On
1 = Off
2 = On
1 = Off (will not check)
2 = On (checks)
1 = Off (without image)
2 = On (with image)
Indicates the Host software
version.
TX/RX/PRT/CPY
1 = Off
2 = On
01 = 1 sec.
~
60 = 60 sec.
01 = 1 sec.
~
10 = 10 sec.
01 = 1 sec.
~
99 = 99 sec.
1 = Off
2 = On
1 = Inc
2 = On (Always)
Selects whether to detect the Busy Tone.
Selects whether to detect dial tone before dialing the
telephone number.
Selects whether the unit checks the DC Loop during
communication.
Selects whether the machine prints the COMM.
Journal with image.
Displays the transmitted, received, total printed and
copied document count.
Selects whether to print in the Fax Parameter List,
the counter information that is displayed in the
Function Parameter No. 61.
Select silent detection timeout time (TAM I/F).
Select ring detection integration time (TAM I/F).
Select ring detection count 1 to 99 times in one step
intervals on TAM I/F mode.
Selects whether the machine will forward the
incoming and outgoing faxes to a specified station.
Note:
Once this parameter is activated, Fax Forwarding
via Fax Parameter 054 is automatically disabled,
an Access Code of "0000" is automatically
assigned and Fax Parameter 038 has a new
setting added called "NYSE".
Selects the printing condition for the incoming faxes
after FAX Forwarding.
Inc. : Prints only if FAX Forwarding fails.
On : Always prints.
123
Function