(10)
(11)
(10)
(13)
(14)
(B)
(12)
(13)
(A)
(10) 4 Screws (19).
(11) Remove the ASF Frame Assembly (418).
(12) Remove the Snap Ring (G3).
(13) Remove 4 Snap Rings (B9), Clutch Assembly
(424 - 427, 460), 2 Cam Gears (428), Bushing
(422), P6L5 Conductor Bushing (429)
(14) Remove the Pick Bracket Assembly (433).
Note:
Re-assemble the Clutch Assembly and follow the
instructions below to properly align it.
Slowly pull out the F Gear D34 (427) and select
one of the five notches (B) on the Clutch Case that
will align the triangular notches (A) of the Clutch
Drum (424) [Black] and Clutch Case (426) [White]
Note:
To synchronize the Cam Gears, when re-installing
the Cam Gears, make sure that the alignment
pointers of the Cam Gears are properly placed into
the notches of the Cams on both sides.
32