Panasonic UF-490 Service Manual page 26

(17)
(18)
(21)
(20)
(22)
(16) Release the Latch Hooks with the Screw driver.
Note:
(17) Remove the Scanning Roller Assembly (218) .
Back View
(18) Remove the Scanning Roller (218).
(19) Lift the White Guide (216).
(19)
(20) Release the Latch Hooks.
(21) Remove the CIS Holder (224) with the CIS
Assembly.
(22) Remove the CIS Assembly (223).
Note:
When re-installing, make sure to install the CIS
Assembly into the CIS Holder first, before re-
attaching it to the Lower TX Chassis Assembly.
26
For B4 Units (non-USA), release the Latch
Hooks from the back side.