2.2.7.
Motor, Left Toner Cartridge Rail, Feed Roller, Bias Transfer Roller
(1)
(5)
(7)
(8)
(9)
(2)
(4)
(3)
(6)
(7)
(10)
(12)
(13)
(11)
(1) Remove Motor Cover (518) releasing 3 Hooks.
(2) Disconnect the MOT Harness (1006).
Note:
Note the Harness routing to the PC Board for
re-installation purposes.
(3) 2 Screws (19).
(4) Remove the Motor (501).
(5) Remove the Snap Ring (B9).
(6) Remove the Feed Roller (439).
Note:
Lift the right side of the Feed Roller pushing
towards the left.
(7) 4 Screws (19).
(8) Remove the Left Toner Cartridge Rail (608).
(9) 3 Screws (19).
(10) Remove the BTR Guide (445).
(9)
(11) 2 Screws (19).
(11)
(12) Remove the Plate Holder (453)
(13) Remove the Discharge Plate (452)
29