Scanning A Number Of Originals ([Separate Scan]) - Olivetti d-COLOR MF652 Operation Manual

1

Scanning a number of originals ([Separate Scan])

If the number of original sheets is so large that they cannot be loaded into the ADF at the same time, you can
load them in several batches and handle them as one job.
In [Separate Scan], you can switch between the ADF and Original Glass to scan the originals.
1
Load the original.
NOTICE
Do not load more than 150 sheets at a time into the original tray, and do not load the sheets up to the
point where the top of the stack is higher than the , , mark. Doing so may cause an original paper jam,
damage the originals, and/or cause an ADF failure.
2
Tap [Application] - [No. of Originals] - [Separete Scan], and set to [ON].
3
Press the Start key.
The original is scanned.
1-24
Scan option settings
d-Color MF 752/652
1.4