When Using Windows Vista - Olivetti d-COLOR MF652 Operation Manual

3

When using Windows Vista:

Carry out preparations to send original data scanned by this machine to your computer.
First, check the name of your computer and that of the login user.
0 You need to have the administrator privileges to perform this task.
1
From the Start menu, click [Computer] - [System properties].
2
Check [Computer name].
% The computer name is required to specify a destination. Write down the computer name.
Then, close the window.
3
From the Start menu, click [All Programs] - [Accessories] - [Command Prompt].
4
Check the name of the user who logs in to the computer.
% The user name is required to configure folder sharing settings and specify destinations. Write down
the user name.
Then, close the window.
Next, create a folder where to send the scanned original data, and start sharing.
5
From the Start menu, click [Control Panel] - [Network and Internet] - [Network and Sharing Center].
6
In [File sharing] of [Sharing and Discovery], click [Turn on file sharing].
Click [Save Changes], and close the window.
7
Create a new folder in any place, and name it.
% The folder name is required to specify a destination. Write down the folder name.
8
Right-click on the folder, then click [Properties].
9
Click the [Sharing] tab, and also click [Advanced Sharing].
% If you see the screen for reconfirming the start of file sharing, click [Continue].
10
Select the [Share this folder] check box, then click [Permissions].
11
In [Group or user names], click [Everyone].
12
Select the check box to permit [Change], then click [OK].
13
Click [OK] or [Close], and close each screen.
The settings on the computer are then completed. The computer, user, and folder names you wrote
down in this procedure are required to specify a destination.
3-6
Preparation for SMB Send
d-Color MF 752/652
3.2