When Using Windows Xp - Olivetti d-COLOR MF652 Operation Manual

3.2 Preparation for SMB Send

When using Windows XP:

Carry out preparations to send original data scanned by this machine to your computer.
First, check the name of your computer and that of the login user.
0 You need to have the administrator privileges to perform this task.
1
From the Start menu, right-click [Computer], then click [Properties].
2
Click the [Computer Name] tab, and check [Full computer name].
% The computer name is required to specify a destination. Write down the computer name.
Then, click [Cancel].
3
From the Start menu, click [All Programs] - [Accessories] - [Command Prompt].
4
Check the name of the user who logs in to the computer.
% The user name is required to configure folder sharing settings and specify destinations. Write down
the user name.
Then, close the window.
Next, create a folder where to send the scanned original data, and start sharing.
5
Create a new folder in any place, and name it.
% The folder name is required to specify a destination. Write down the folder name.
6
Double-click the folder, and select [Tools] - [Folder Options...].
7
Click the [View] tab, and clear the [Use simple file sharing (Recommended)] check box.
Click [OK], and close the window.
8
Right-click on the closed folder, then click [Sharing and Security...].
9
Select the [Share this folder] check box, then click [Permissions].
% Do not change [Share name].
10
In [Group or user names], click [Everyone].
11
Select the check box to permit [Change], then click [OK].
12
Click [OK], and close the screen.
The settings on the computer are then completed. The computer, user, and folder names you wrote
down in this procedure are required to specify a destination.
d-Color MF 752/652
3
3-7