Configuring Camera Settings; Setting Camera Name, Covert Settings And Camera Audio Input; Adjusting Camera Color - Digimerge DHU600 Series Instruction Manual

Configuring Camera Settings

Setting Camera Name, Covert Settings and Camera Audio Input

To set up camera properties:
1. Click the Setup Tab near the top of the window. The Camera settings window opens.
Figure 35.1 Camera Settings: Change camera title, enable/disable Covert recording mode, and
enabling audio.
2. Under Camera Title, enter in a name of the camera. Enter in a name beside the All field to
give all your cameras the same name.
3. Under Covert, select ON or OFF.
NOTE: Under Covert recording, the camera view blacks out during recording. This gives the
impression that the particular channels is inactive.
4. Under Audio select desired audio channel (Channels 0~4) to use with the specific channel.
5. Click OK to save your settings.

Adjusting Camera Color

To adjust the camera color:
1. Click the Color sub-menu (Camera>Color). The Color-Setting window opens.
Figure 35.2 Adjust camera color settings.
Using Web Remote Viewer
Setup tab
71