Enabling Ddns On Your Dvr; Enabling Ddns - Digimerge DHU600 Series Instruction Manual

Using Web Remote Viewer

Enabling DDNS on your DVR

To enable DDNS on your DVR:
1. Click Network on the navigation menu on the left. The IP Setup Setting window opens.
2. Under the DDNS drop-down menu, select ON to enable ddns.
3. Click OK to save your settings.

Enabling DDNS

You must set up a DDNS account before you can enable DDNS on your system.
• For details on setting up a DDNS account, see "Appendix C: Setting Up DDNS Service" on
page 97.
To enter your DDNS settings remotely using Web Remote Viewer:
1. Click Network on the navigation menu on the left. The IP Setup Setting window opens.
2. Click DDNS. The DDNS Setup Setting window opens.
Figure 37.8 DDNS Configuration.
3. In the DDNS drop-down menu, select ON
4. In the User ID field, enter the User ID of your DVR.
5. In the Domain Name field, enter the sub-domain of your DDNS address.
• For example if your DDNS address is tomsmith.ddns.digimerge.net, your sub-domain is
tomsmith.
6. In the Password field, enter your DVR login password.
7. Click the Status button to confirm DDNS is functional.
86