Sound; Audio; Buzzer - Digimerge DHU600 Series Instruction Manual

SOUND

Configure live audio, network audio,
and buzzer settings.
Audio-capable cameras or
NOTE:
self-powered microphones (not included)
must be connected to the system in order
to use listen-in audio (live audio
monitoring).

AUDIO

Use the audio menu to configure live audio and
network audio settings.
Figure 19.0 Audio Menu
To configure live audio settings:
1. Select AUDIO and press ENTER.
2. Under LIVE AUDIO, select ON/OFF to
enable/disable listen-in audio on the
system.
3. Under DEFAULT AUDIO CHANNEL, select
CH1, CH2, CH3, or CH4.
4. Select APPLY and press ENTER to save
your settings or select CANCEL to restore
defaults.
5. Select CLOSE and press ENTER to exit.
To configure network audio settings:
1. Under NETWORK AUDIO TRANSMISSION,
select ON/OFF to enable/disable the
transmission of audio to a a remote PC.
Network audio will consume more
NOTE:
bandwidth and may affect the transmission
of the video signal. Enable or disable
network audio based on your network
settings.
2. Under DIGITAL AUDIO RECEIVE, select
ON/OFF to enable/disable the reception of
audio from a remote PC.
3. Select APPLY and press ENTER to save
your settings or select CANCEL to restore
defaults.
4. Select CLOSE and press ENTER to exit.

BUZZER

Use the Buzzer menu to control the "beep"
from the system when you press a button on
the remote control or front panel.
Figure 19.1 Buzzer Menu
To enable/disable the system buzzer:
1. Select BUZZER and press ENTER.
2. Under KEYPAD, select ON/OFF.
3. Select APPLY and press ENTER to save
your settings or select CANCEL to restore
defaults.
4. Select CLOSE and press ENTER to exit.
Using the System Menu
37