Panic Recording - Digimerge DHU600 Series Instruction Manual

Using the Recording Menu
The selected blocks appear light
NOTE:
green to indicated alarm recording has now
been activated.
3. Select APPLY and press ENTER to save
your settings or select CANCEL to restore
defaults.
4. Select CLOSE and press ENTER to exit.

Panic Recording

Use the Panic Recording menu to set camera
parameters for each channel during panic
recording.
Figure 30.0 Panic Recording menu
By default, the system is set to record
NOTE:
at the highest quality recording parameters
during Panic Recording.
To set panic recording parameters:
1. Select PANIC RECORDING and press
ENTER twice. The Camera Parameters
window opens.
Figure 30.1 Panic Recording menu
56
2. From the Camera Parameters window,
configure the following:
• SIZE: Select from 352x240, 704x240, or
704x480 (default)
• FPS: Select from 1, 2, 3, 7 (default), 15, or
30 frames-per-second (real-time
recording) from a shared pool of 240 FPS
• QUALITY: Select from LOW, STANDARD,
HIGH, HIGHEST or SUPER
• AUDIO: Select ON/OFF for the desired
channel(s)
The system can record a maximum of
NOTE:
four audio channels simultaneously.
3. Select OK and press ENTER to save your
settings. The Camera Parameters window
closes.
4. Select APPLY and press ENTER to save
your settings or select CANCEL to restore
defaults.
5. Select CLOSE and press ENTER to exit.