Digimerge DHU600 Series Instruction Manual page 64

Using the Recording Menu
multiple blocks and then press ENTER.
The Camera Parameters window opens.
Figure 28.1 Select a time block(s) and configure camera
parameters
5. From the Parameter window, select and
configure the following options for each
channel of the selected time block:
• SIZE: Select from 352x240 (default),
704x240, or 704x480
• FPS: Select from 1, 2, 3, 7, 15, or 30 (default)
frames-per-second (real-time recording)
from a shared pool of 240 FPS
If the number of frames remaining in
NOTE:
the shared pool is a negative number you
will receive an error message. You will need
to adjust Size and FPS parameters to ensure
a positive number of frames remains in the
shared FPS pool.
52
Figure 28.2 Error message due to negative frames remaining in
the shared FPS pool
• QUALITY: Select from LOW, STANDARD,
HIGH, or HIGHEST (default)
• AUDIO: Select ON/OFF for the desired
channel(s)
The system can record a maximum of
NOTE:
four audio channels.
6. Select OK and press ENTER to save your
settings. The Camera Parameters window
closes and the configured time block(s)
change color.
Color in the Time Interval Bar simply
NOTE:
indicates that recording parameters have
been changed for the selected time block.
Colors are assigned randomly if you make
changes for different time blocks.
Figure 28.3 Changed time blocks
7. Select APPLY and press ENTER to save
your settings or select CANCEL to restore
defaults.
8. Select CLOSE and press ENTER to exit.