Usb Host Communication Setup - Motorola MC909X Integrator Manual

2 - 48 MC909X Integrator Guide

USB Host Communication Setup

NOTE USB Host mode is only available on Windows Mobile 5.0 devices.
The mobile computer can be configured as a USB host device for use with USB client devices.
To configure the mobile computer as a USB host:
Tap >
1. Start Settings
USBConfig Settings Window
Figure 2-59
Tap the
2. USB Host Mode
Tap .
3. OK
NOTE When the mobile computer is configured a a USB host, it cannot ActiveSync with a host computer.
To configure the mobile computer as a USB client:
Tap >
1. Start Settings
Tap the
2. USB Client Mode
Tap .
3. OK
Remove the mobile computer from the cradle or CAM.
4.
Re-insert the mobile computer into a cradle or re-connect the CAM.
5.
> > icon.
System USBConfig
radio button.
> > icon.
System USBConfig
radio button.