Serial Cradle Baud Rate; Modem Cradle Settings; Launch Activesync; Establish Network Connection - Motorola MC909X Integrator Manual

Select a
2. File Type
Select a Folder (as needed).
3.
Select a file name in the list.
4.
Use the input panel to specify command line parameters.
5.
Tap at the top of the screen.
6. OK
The selected application appears in the settings tab.

Serial Cradle Baud Rate

This option allows you to specify the baud rate iDockIt should use for a serial cable or cradle. Set this rate to match
the host computer that the cradle or cable is connected to.
If you are using a USB cradle or cable, the USB driver automatically determines the connection speed.

Modem Cradle Settings

If you use a modem cradle, you can automatically connect to a remote host computer or network or you can
synchronize with a host computer with which you have set up a partnership using ActiveSync. Alternatively, you
can connect to your network and/or launch a specified application on the mobile computer.
Modem Settings Tab
Figure B-6

Launch ActiveSync

Check this option to have iDockIt launch ActiveSync when you place the mobile computer in a modem cradle.
NOTE Checking this option automatically unchecks Establish network connection and Launch application.
Similarly, checking either one of those options automatically unchecks Launch ActiveSync.

Establish Network Connection

Check this option to have iDockIt establish a network connection when you place the mobile computer in a modem
cradle. iDockIt uses the modem connection specified in the
If you check this option,
in the drop-down list.
is automatically unchecked.
Launch ActiveSync
list in this tab.
Connect using
Using iDockIt B - 9