Usb Host Communication Setup - Motorola MC9190-G Integrator Manual

USB Host Communication Setup

NOTE USB Host mode is only available on Windows Mobile devices.
The MC9190-G can be configured as a USB host device for use with USB client devices.
To configure the MC9190-G as a USB host:
Tap >
1. Start Settings
Tap the
2. USB Host Mode
Tap .
3. OK
NOTE When the MC9190-G is configured a a USB host, it cannot ActiveSync with a host computer.
To configure the MC9190-G as a USB client:
Tap >
1. Start Settings
Tap the
2. USB Client Mode
Tap .
3. OK
Remove the MC9190-G from the cradle or CAM.
4.
Re-insert the MC9190-G into a cradle or re-connect the CAM.
5.
> > .
System USBConfig
radio button.
> > icon.
System USBConfig
radio button.
Accessories 2 - 37