Services - Motorola MC909X Integrator Manual

Tap to enable the PIN and return to the
3. Enter
Changing a PIN
CAUTION If you enter an incorrect PIN, the message 'SIM PIN incorrect: Try again' appears. After three consecutive
incorrect attempts, the SIM card is blocked. The phone does not allow you to attempt to enter your PIN
again and you must obtain a PIN Unblock Key from your service provider.
From the tab
1. Phone
Use the touch keypad to enter the current PIN.
2.
Tap .
3. Enter
Use the touch keypad to enter a new four to eight digit PIN.
4.
Tap .
5. Enter
Reenter the new PIN for confirmation and tap
6.
Tap to confirm the change.
7. ok
Disabling a PIN
From the tab
1. Phone
Use the touch keypad to enter the current PIN.
2.
Tap Enter.
3.
Tap ok to confirm the change.
4.
Tap ok to exit settings.
5.

Services

NOTE Not all services are available on all network. Contact your service provider for details.
Use the tab to configure settings for subscribed phone services. For example, block certain types of
Services
incoming and/or outgoing calls
when making outgoing calls
Forwarding on page 5-11), be notified of incoming calls when a phone session is in use
and set up voice mail and short message service
Tap >
1. Start Settings
or
> >
Start Phone Menu
Phone
(Figure 5-11 on page 5-7), tap
Enter
(Figure 5-11 on page 5-7), deselect the
(Call Barring (Call Blocking) on page
(Caller ID on page 5-10), forward incoming calls to a different phone number
(Voice Mail and Short Message Service (SMS) on page
> tab > icon >
Personal Phone
> > tab.
Options Services
tab.
.
Change PIN
.
Require PIN when phone is used
5-10), allow the caller's identity to be disclosed
tab.
Services
MC9094 Configuration
check box.
(Call
(Call Waiting on page
5-12).
5 - 9
5-11)