Motorola MC909X Integrator Manual page 61

Setting the Device IP Address
By default, the cradle uses DHCP to obtain its IP address. However, if DHCP fails, the Cradle Manager can assign
an IP address.
NOTE This is used if the cradle is connected to the network, but fails to appear in MobileDox. Enter the hardware
device (MAC) address to locate the cradle and assign it a new IP address.
To set the IP address:
Launch the MobileDox Cradle Manager on the host computer.
1.
Click >
2. File Set IP Address of Unlisted Device
Set IP Address Window
Figure 2-10
Enter the appropriate MAC Address and IP address.
3.
Click .
4. OK
Modifying Cradle Settings
Launch the MobileDox Cradle Manager on the host computer.
1.
Select the name of the cradle you want to configure from the list.
2.
Click >
3. Device Modify Settings
Use the
4. General Settings
. The Set IP Address window appears:
.
tab to modify the identification settings of the cradle.
Getting Started 2 - 13