How To Prepare The Mobile Computer To Connect; How To Start Idockit; How To Enable Idockit To Manage Connections - Motorola MC909X Integrator Manual

How To Prepare the Mobile Computer To Connect

Using Microsoft ActiveSync, ensure you have established a partnership between the mobile computer and the host
computer. This should happen the first time you cradle the mobile computer. If you are using an Ethernet cradle,
you must set up the partnership with the host computer using a serial or USB cable or cradle.
For more information, see ActiveSync Help on the host computer.

How To Start iDockIt

Tap > >
Start Programs

How to Enable iDockIt to Manage Connections

On the iDockIt
General
settings you have defined for each cradle type until you uncheck this option or exit.
To connect automatically to your host computer or network:
Tap
1. Enable iDockIt
2. Check or uncheck Display status when cradled
Check
3. Display settings when cradled
automatically.
Uncheck the
4. Autoconnect
Tap the iDockIt tab that corresponds to your cradle type.
5.
For an Ethernet cradle, check
a.
For a direct connection using a USB cradle/cable, serial cable/cradle, or for a Modem cradle, check
b.
Launch ActiveSync
physically connected, check
Connections, select
To connect to a network using any type of cradle, tap
c.
To connect manually to your host computer or network:
While iDockIt is designed to connect the mobile computer to a specified host computer or network automatically,
you can also choose your connection manually whenever you cradle the mobile computer.
Tap
1. Enable iDockIt
2. Check or uncheck Display status when cradled
Check
3. Display settings when cradled
automatically.
Uncheck the
4. Autoconnect
Tap the iDockIt tab that corresponds to your cradle type.
5.
Check
6. Establish network connection
. The tab displays.
iDockIt General
tab, check . iDockIt makes connections and carry out tasks according to the
Enable iDockIt
in the tab.
General
. When you cradle the mobile computer, the
option.
Launch ActiveSync
; if you wish to connect to a host computer other than the one to which you are
with and choose the host computer in the list. (In ActiveSync
Sync
Allow serial...connection
in the tab.
General
. When you cradle the mobile computer, the
option.
and optionally
.
and select the host computer you want to connect to.
and
Allow network...connection
Establish network connection
.
.
Launch application
Using iDockIt B - 13
tab displays
Settings
.)
.
tab displays
Settings