Motorola MC909X Integrator Manual page 298

B - 22 MC909X Integrator Guide
Select a
2. File Type
Select a
3. Folder
Use the input panel to specify command line parameters.
4.
Select a file name in the list.
5.
Tap at the top of the screen.
6. OK
The selected application appears in the settings tab.
Choose Connection
The
Connect using
Choose the one you wish to use.
If you check the General settings options to
have an opportunity to select the appropriate modem connection when you place the mobile computer in the
cradle.
If you do not check the above options, iDockIt uses the last modem connection you selected.
Tap to create a new modem connection.
New
Tap to change the settings of an existing modem connection.
Edit
Tap to delete the currently displayed modem connection.
Delete
Create A New Modem Connection
Get the following information from your ISP or network administrator: dial-up access telephone number, user
1.
name, password, domain name, and TCP/IP settings.
Tap below the
2. New
In the Connection Properties dialog, enter a name for the connection.
3.
In the Modem list, tap your modem type. For the modem cradle, tap
4.
Tap
5. Configure
requirements for your modem.
Tap after entering the connection name and choosing a modem.
6. Next
Enter the access phone number and then tap
7.
Enter Login information (user name, password, and domain name) and then tap
8.
You should not need to change any TCP/IP settings unless directed by your ISP or network administrator. Tap
9.
and then tap
Next
The new modem connection is in the drop-down list.
Edit An Existing Modem Connection
In the
1. Connect using
Tap .
2. Edit
in the drop-down list.
(as needed).
drop-down list includes all modem connections that you have defined for the mobile computer.
Display settings when cradled
list.
Connect using
and change any Port Settings or Call Options in the Device Properties dialog, depending on
in the next server address dialog.
Finish
list, select the modem connection you need to modify.
and
Hayes Compatible on COM1
.
Next
Auto-connect after x seconds
.
.
Next
, you