Sys Stat - Motorola MC909X Integrator Manual

6 - 14 MC909X Integrator Guide
Tap ok to exit settings.
3.

Sys Stat

NOTE This property page is for diagnostics only and is not visible by default. To display this property page, navigate
to the Windows directory using File Explorer and launch the PropertyPages.exe file. Follow the on-screen
instructions for installation. To remove the property page clean boot the device.
Use the tab to view system information.
Sys Stat
Tap >
1. Start Settings
or
>
Start Phone
MC9097 Phone Window - Sys Stat Tab
Figure 6-21
Sys Stat Tab Data
Table 6-2
Item
RSSI
SQE
Band Spec
Carrier
Outbound Signal
Tx/Rx Pwr
> tab >
Personal Phone
> > >
Tools Options Phone Info
Lists the Received Signal Strength Indicator in dBm. Usually between -104 and -80.
-80 is a very strong signal and -104 is very weak.
Lists the Signal Quality estimate. Gives a measure of signal quality where RSSI gives
a measure of signal strength. Values around 20 are good.
Lists the Band Specifier that restricts the modem to a certain band of frequencies.
Lists the current frequency that the modem is tuned into and is interpreted as:
XXX-YZ where XXX is the carrier number, Y is the color code and Z is the extended
color code.
Lists the signal quality of the received RF signal.
Duplicate of RSSI field.
icon > tab.
Sys Stat
tab.
Description