Serial Communication Setup; Setting Up A Connection On The Mobile Computer (Windows Mobile 2005) - Motorola MC909X Integrator Manual

2 - 44 MC909X Integrator Guide

Serial Communication Setup

The serial communications setup can be used to set up to communicate with a Single Slot Serial/USB Cradle, MSR
or a CAM.
NOTE For serial communication using accessories that can communicate with either a serial or USB connection,
connect only the serial cable. Do not connect both the serial and USB cables. If both serial and USB
communication cables are required, the host computer's USB port must be disabled in ActiveSync before
serial communication can be enabled.
Setting Up a Connection on the Mobile Computer
On the mobile computer tap
1.
ActiveSync Window
Figure 2-51
Tap >
2. Menu Connections
Connections Window
Figure 2-52
Select the Synchronize all PCs using this connection: check box.
3.
Select the connection (e.g., serial COM port, Bluetooth, or USB) for synchronization from the drop-down list.
4.
The default connection for synchronization is USB.
Tap ok to exit the
5.
>
Start Programs
. The window appears.
Connections
window.
Connections
(Windows Mobile 2005)
> to display the
ActiveSync
window.
ActiveSync