Table of Contents
Advertisement
8 - 12 MC909X Integrator Guide
Parameter State Indicators
The first column of the data table displays parameter state indicators. The state indicators display one of the states
in
Table 8-2
for a particular parameter:
Parameter Status Indicators
Table 8-2
Icon
Indicator
Modified
Invalid
Window Status Bar
The SCM status bar found on the bottom right corner of the window contains the items in
right:
Window Status Bar Items
Table 8-3
Status Bar Item
Invalid Count
Modified Count
Device Type
Sample Status Bar
Figure 8-2
The sample status bar in
File Deployment
The .reg file created by the SCM export function must be deployed to the mobile computer.
Select
>
1.
File
Export changes to .reg
to create a .reg file for all settings.
.reg
Copy the .reg file to the mobile computer.
2.
Tap the filename to install.
3.
Certain applications and settings require a cold boot to take affect. In these cases, cold boot the mobile
4.
computer. Refer to the Windows Mobile Version 5.0 Help file for more information.
This parameter was changed from its initial factory setting.
This parameter is not valid for the selected device type. This can occur when a
configuration file for one type of device is loaded and the device type is changed using
the
menu. Values marked "invalid" are not included in an exported.
Device
Number of parameters not valid for the selected device.
Number of parameters modified from the factory defaults.
Device type - version.
Figure 8-2
shows that the current configuration file contains 3 modified parameters.
to create a .reg file for only the changes made or select
Description
Table 8-3
Description
from left to
>
File
Export all to
Advertisement
Table of Contents
Troubleshooting
