Automatic Setting Mode (System Start); Setting Range Scale - JRC JMA-9832-SA Instruction Manual

......Automatic Setting Mode (System Start) ..............................

The modes that are automatically set on the system start are shown in Table 5.1.
Mode
DISPLAY MODE
ACQUIRE
TRIAL
GUARD ZONE
......Setting Range Scale: RANGE SCALE .................................
The ARPA functions can operate on all range scales. Usually, set any range scale in a range of 1.5 to 24
NM depending on the water area of operation.
Note: The range over which the target can be captured by the ARPA is from 0.1 to 32 NM.
Table 5.1 Mode Setting on System Start
Initial Setting
RM (relative motion)
AUTO OFF
OFF
OFF
5 – 4
5.1 INITIAL SETTING
Refer to Section
3.4
5.3
5.7
3.4 and 5.6
.. ...
5