Setting The Automatic Sailing System; Displaying The "Autosail" Dialog - JRC JMR-7230-S3 Instruction Manual

Synchronizing setting
The "Ship's Parameters" dialog enables common setting items and individual setting items for RADAR,
ECDIS, and Conning (called a task station individually). Once common items are set in any of the task
stations, RADAR, ECDIS, and Conning, the settings are reflected (synchronized) in other task stations.
By setting common items in the state where all the task stations are active, the common setting items
are synchronized in all the task stations.

19.3.5 Setting the automatic sailing system

By using the "Autosail" dialog, verify and initialize the automatic sailing system that is installed in this
equipment.

19.3.5.1 Displaying the "Autosail" dialog

When you select [Settings] in the first classification pane and [Autosail] in the second classification
pane, the "Autosail" dialog is displayed in the edit/result pane.
Section 19 Adjusting and Setting up Equipment (for Services)
19-29
１
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
APP A
APP B