Display Processed Videos - JRC JMA-9832-SA Instruction Manual

......Display Processed Videos ................................................

Unnecessary noise will be reduced to highlight targets.
Attention
In watching a radar beacon mark, SART signal or a fast moving target on the radar display, set
the system to: PROCESS OFF (Processed Video OFF)
It is most suitable to use this function in the TM mode.
In using this function in the RM mode, use it in the North-up or Course-up mode. In using the
function in the Head-up mode, the video may be blurred.
MENU
Procedures 1 Press
The Main Menu will appear.
2 Press
3.PROCESS
appear.
3-1 Press
2. PROC1
will be selected.
The targets moving at low speeds will be darkened.
This function is recommendable on the radar ranges of 1.5 NM
or less.
3-2 Press
3. PROC2
This processing speed is in a range between PROC1 and PROC3.
3-3 Press
4. PROC3
The targets moving at high speeds will be darkened.
This function is recommendable on the radar ranges of 3 NM or more.
.
3
.
will be selected and the pull-down menu will
2
.
will be set and the targets moving at high speeds
3
.
will be set.
4
.
will be set and the targets moving at low speeds will be selected.
3 – 74
3.4 BASIC OPERATIONS
M A I N M E N U
1.IR
OFF ON
2.TGT ENH
OFF ON
3.PROCESS
2. PROC1
1. OFF
4.FUNCTION
2. PROC1
1. FUNC OFF
3. PROC2
5.EBL1
4. PROC3
CENTER OFFSET
6.EBL2
CENTER OFFSET
7. DATA OFF
8. SUB1 MENU
9. DEGAUSS
0. E X I T
. ..
3