Clearing Data Display - JRC JMA-9832-SA Instruction Manual

......Clearing Data Display

Procedures 1 Press
DATA
TGT DATA
2 Move the cross cursor to a target to cancel its data (with its ID being indicated)
using the trackball. Then, press trackball section right button or
clearing of the data.
or,
Procedures 1 Press
DATA
TGT DATA
2 Enter the indentification number of the target to cancel its data from the ten-key.
Then, press
TGT DATA ....................................
TGT
.
will appear in the CURSOR ( ) at the upper right of the radar display.
TGT
.
will appear in the CURSOR ( ) at the upper right of the radar display.
CLR
to set the cleaning of the data.
5 – 22
.. ...
5.6 DATA DISPLAY
CLR
to set the
5