JRC JMA-9832-SA Instruction Manual page 74

Procedures 1 Check that the ship's mains are turned on.
2 Press
Green lamp on
The warm-up time will appear.
3 Press
The radar starts transmission and the scanner starts rotating.
The STANDBY changes to TRANSMIT on the display.
Even if the [TX/STBY] switch is pressed before
start transmission.
The way of operation to cancel preheat time at the emergency.
Push and hold
0
But there is a possibility that the degradation of the magnetron, use only in emergency.
PWR
.
PWR
TX
STBY
.
MENU
key for about 10 seconds, and push the
ENT
, 0 ,
STANDBY
keys, the preheat time is canceled and become to ST-BY.
3 – 3
is displayed, the radar does not
9 , 8 ,