Display Mode Setting; Setting Motion Display Mode; Setting Bearing Display Mode - JRC JMA-9832-SA Instruction Manual

5.2

DISPLAY MODE SETTING

......Setting Motion Display Mode

TM
Press
RM
(RM) display mode. In the initial state, the mode is set to RM.
Note
For further details of the TM/RM mode, refer to section 3.4 "Select True/Relative Motion
Display Mode".

......Setting Bearing Display Mode

AZI
Press
MODE
Note
For further details of the AZI MODE, refer to section 3.4 "Select Bearing Display Mode".
to select the true motion (TM) display mode or the relative motion
to set the bearing display mode.
5 – 7
TM/RM ..............................
AZI MODE ........................