Acquire And Measurement Data; End The Operation And Stop The System - JRC JMA-9832-SA Instruction Manual

......Acquire and Measurement Data ..........................................

For detailed operations for data acquisition and measurement, refer to Section 3.4 "BASIC
OPERATIONS" and Section 4 "MEASUREMENT OF RANGE AND BEARING".

......End the Operation and Stop the System ..............................

1 Press
Exit
The radar transmission will end and the scanner will stop rotating.
The indication TRANSMIT will be changed into STANDBY .
(Maintain the [STANDBY] mode if radar observation is restarted in a relatively short time. Only
pressing [TX/STBY] switch will restart observation.)
2 Press
The power will be turned off.
TX
.
STBY
PWR
.
Green lamp off
3 – 7
PWR