Flow Of Operation - JRC JMA-9832-SA Instruction Manual

3.1

FLOW OF OPERATION

Attention
Do not put anything on the operation panel. If you put anything hot on it, it may be deformed.
Do not give any impact on the operation panel, trackball and controls. Otherwise, any failure or
damage may result.
The flow of basic operations is shown below.
POWER ON AND
START THE SYSTEM
OBSERVE AND
ADJUST VIDEO
TUNING OPERATIONS
ACQUIRE AND
MEASUREMENT DATA
END THE OPERATION AND
STOP THE SYSTEM
Each operation will be described in detail below.
3 – 1