Understanding The Lighted Keys; Emergency Activation Keys - Interlogix NX1248 Instruction Manual

Quick Arm:
An option that allows you to turn on (ARM) the security
system by double pressing either the [AWAY], [STAY], or
[NIGHT] key on the keypad (for ARMING only) as
programmed by the installing company.
User Code:
A 4-digit or 6-digit entry code used to arm or disarm the
system.

UNDERSTANDING THE LIGHTED KEYS

AWAY / STAY / NIGHT
The [AWAY], [STAY], [NIGHT] keys are illuminated when the system is armed to
one of these respective modes. They are all "off" when it is disarmed. The
[AWAY], [STAY], [NIGHT] keys will flash when there has been an alarm during the
previous arm cycle.
BYPASS
The [BYPASS] key is illuminated when any zone in this keypad's partition is
bypassed. If the [BYPASS] key is "off", no zones are bypassed.

EMERGENCY ACTIVATION KEYS

NOTE: You must press and hold these keys for 2 seconds to activate these
functions. Your system may not be programmed for these activations.
Fire Key - If programmed, you can activate the Fire alarm by pressing the
Emergency Activation [Fire] key for two seconds. If your system is connected to a
monitoring center, an emergency report could be sent to that center. This key
should only be pressed in an emergency situation requiring response by fire
department personnel.
Auxiliary Key - If programmed, you can activate the auxiliary alarm by pressing
the Emergency Activation [Auxiliary] key for two seconds. If your system is
connected to a monitoring center, an emergency report could be sent to that
4
LCD Keypad