Keypad Control Tones (Beeps) - Interlogix NX1248 Instruction Manual

KEYPAD CONTROL TONES (BEEPS)

A sounder is built into the keypad and may sound for any of the following
reasons:
T Beeps for all keypresses.
T Sounds a continuous tone during the Entry delay time.
T Pulses when a day zone is violated while the system is disarmed.
T Pulses when a FIRE zone has a trouble condition.
T Pulses when the armed status changes and the AC power is off.
T Beeps 3 times for trying to arm with the "System Ready" message
off, if "force arming" has not been selected.
T Beeps 1 second for the 'CHIME" feature.
T Beeps 1 second at the end of the exit delay.
T Beeps to indicate telephone line fault if selected.
T Beeps rapidly to alert you that there are only ten seconds remaining
in the exit delay.
T Beeps 3 times every minute indicating a low battery or missing
transmitter is detected (if wireless device is in system). Entering code
will suppress the sounder for 12 hours.
Entering a valid code will silence the keypad sounder when it is pulsing. The
arm/disarm state of your system will not change when entering a code to
silence a pulsing keypad sounder. Please contact your installer if a trouble
condition exists.
18
LCD Keypad