Displays In The Partitioning Master Mode - Interlogix NX1248 Instruction Manual

DISPLAYS IN THE PARTITIONING MASTER MODE

ARMED and READY STATUS
The LCD screen will display the Armed and Ready status of ALL eight (8)
partitions if any or all of the areas is armed or not ready.
5HDG\
$UPHG
6\VWHP5HDG\
7\SH.RGHWRDUP
ARMING AND DISARMING MULTIPLE PARTITIONS
To arm/disarm multiple partitions, enter a code that has arm/disarm authority for
ALL of the partitions to be armed/disarmed. The following display will appear on
the LCD screen.
'LVDUP 
$UP
LCD DISPLAY FOR AREA
TOP LINE OVER BOTTOM LINE
Blank
Blank
Dash (-)
Dash (-)
Flashing Area #
Dash (-)
Dash (-)
Flashing Area #
Area #
Dash (-)
Dash (-)
Area #
16
This display is reflecting all 8 areas are
Ready, and Area 5 is disarmed. NOTE: If a
number is flashing on the Armed line, that
area is armed Instant. If a number is flashing
on the Ready line, that area is ready to be
Force Armed.
If ALL areas are disarmed and ready to arm,
this display will appear on the LCD screen.
The numbers on the top line represent the
disarmed areas to which this code has
 access. The numbers on the bottom line
represent the areas that are armed. Refer to
the following table for possible conditions.
CONDITION
Area Not used or Authorized
Area Not Ready
Area Ready to Force Arm
Area Armed Instant
Area Disarmed & Ready to Arm
Area is Armed
LCD Keypad