Adjusting The Colors Of The Image (White Balance) (Only For Sensors With Color Cameras); Rotating The Touch Finder Image By 180 - Omron FQ2-S/CH Series User Manual

Adjusting the Colors of the Image (White Balance) (Only for Sensors with Color Cameras)

If external lighting is used, the image may appear as having different colors than the actual object. If this is the
case, adjust the white balance.
If the lighting built in to the Sensor is used, the white balance is already adjusted. No setting is required in this
case.
[Image] − [Camera setup]
1
Input a picture of white paper or cloth.
2
Press [ ] – [White balance] on the right side of the
display.
3
Press the [Auto] Button. The Sensor will automatical-
ly adjust the colors.
4
Move the bar to the left (light) or right (dark) to fine-
tune the colors.
5
Press [OK].
Rotating the Touch Finder Image by 180°
You can rotate the Camera image by 180°.
This setting also applies to re-measurement of logged images.
[Image] − [Camera setup] − [ ] − [Rotate 180]
72
Adjusting Image Quality FQ2-S/CH User's Manual