Increasing Processing Speed For Edge Position; Measurement Data That Can Be Used For External Outputs And Calculations; Measurement Data That Can Be Logged For Edge Position - Omron FQ2-S/CH Series User Manual

Increasing Processing Speed for Edge Position

Make the measurement region smaller to reduce the processing time.
Changing the measurement region: p. 153

Measurement Data That Can Be Used for External Outputs and Calculations

The following values can be used as measurement data and output to external devices via the Ethernet or used
in calculations.
Expression text string
JG
X
Y
SX
SY
DF
4-17 Calculations and Judgements Using Inspection Item Data: p. 211

Measurement Data That Can Be Logged for Edge Position

The following values can be logged as measurement data.
Measured item
Judgement
D. position (difference in
position)
Position X
Position Y
* When logging data is output, the data is output in the order of the above table.
If more than one item is stored, results are output for each model.
7-6 Logging Measurement Data and Image Data: p. 267
178
Inspecting with the Edge Position Inspection Item
Data name
Judgement This is the judgement result.
Position X This is the X coordinate of the mea-
sured edge position.
Position Y This is the Y coordinate of the mea-
sured edge position.
Ref. position X (reference This is the X coordinate of the edge
position X) position when a range is set.
Ref. position Y (reference This is the Y coordinate of the edge
position Y) position when a range is set.
D. position (difference in This is the offset from the measured
position) reference position.
Range of value
0: Judgement is OK
−1: Judgement is NG
−13: Teaching not performed error
−14: Figure not registered error
−15: Out of range error
−99999.9999 to 99999.9999
−99999.9999 to 99999.9999
−99999.9999 to 99999.9999
Description
Description
This is the measurement judgement results.
This is the offset from the measured reference position.
This is the X coordinate of the measured edge position.
This is the Y coordinate of the measured edge position.
Data range
−2: No judgement (not measured),
0: Judgement is OK,
−1: Judgement is NG,
−13: Teaching not performed error,
−14: Figure not registered error,
−15: Out of range error
−99999.9999 to 99999.9999
−99999.9999 to 99999.9999
−99999.9999 to 99999.9999
−99999.9999 to 99999.9999
−99999.9999 to 99999.9999
FQ2-S/CH User's Manual