Inspect Tab Page - Omron FQ2-S/CH Series User Manual

Menu command
Model parameters
(Shape Search and
Position Compensation
Items only)
Meas. Parameter
Output parameter
Source image
Interpolation
*1 Refer to FQ2-S/CH Series User's Manual for Communications Settings (Cat. No. Z338).

Inspect Tab Page

Menu command
Add item
Modify
Delete
Copy
Rename
Insp. region
For- L.1 to L.4 Sets the character format for recogni-
mat
Camera setup
Charac-
ter color
Printing
type
Dot ver.
interval
Dot hor.
interval
Char.
thick. th.
Noise fil-
ter size
FQ2-S/CH User's Manual
Description
• Shape Search Position Compensation Item and Search Position Compensa-
tion Item
Almost the same as for the Shape Search II and Search inspection item.
However, the [Sub-pixel] and [Multi-point output] settings of the Search
inspection item do not exist.
• Edge Position Compensation, Two-edge Position Compensation, Two-edge Mid-
point Compensation, and Edge Rotation Position Compensation
The settings for the Edge Position Compensation item are almost the same as
those for the Edge Position inspection item.
You can select the image to which to
apply the results of position compensa-
tion processing.
You can select the precision of position
compensation.
Description
Used to add, modify, delete, copy, or
change the name of an inspection
item.
Moves the measurement region or
adjusts the size of the measurement
region.
tion.
Same as Camera adjustments on the Image Tab Page.
Sets the color of the characters to
detect.
Sets the type of printing of the charac-
ters to detect.
Adjusts the vertical dot interval of the
characters to detect. This parameter is
enabled only when [Printing type] is
set to [Dot character].
Adjusts the horizontal dot interval of
the characters to detect. This parame-
ter is enabled only when [Printing type]
is set to [Dot character].
Sets the thickness of the characters.
Negative numbers indicate thinner
characters. Positive numbers indicate
thicker characters.
Sets the size of the filter. Larger values
eliminate wide areas of noise. Small
values eliminate narrow areas of
noise.
Setting range
Camera, Prev. (default)
Bilinear, None (default)
Setting range
4 3 3
OCR* , Bar code* , 2D-code* ,
3 2
2D-code (DPM)* , Search* , Shape
2 2
Search II* , Sensitive Search* , Edge
2 2
Position* , Edge Width* , Edge Pitch*
2 2
Color Data* , Area, Labeling*
---
15 alphanumeric characters
---
32 alphanumeric characters
Black (default) or White
Solid character (default) or Dot charact-
ger
0 (default) to 30
0 (default) to 30
−255 to 255 (default: 0)
−60 to 440 (default: 0)
Data Refer-
ence
Scene ---
Scene ---
Scene p. 85
Scene p. 85
Data Refer-
ence
--- p. 104
2
,
--- p. 105
--- p. 105
---
---
Scene p. 108
Scene p. 108
Scene p. 66
Scene p. 113
Scene
Scene
Scene
Scene
Scene
305
Menu Tables