To Turn Off The Power - Konica Minolta bizhub Pro 920 User Manual

2

To turn off the power

1
Turn OFF the sub power switch.
– The sub power switch is located
on the right side of the control
panel.
The touch panel and all the LEDs
on the control panel other than
the Main Power indicator will go
out.
2
Turn OFF the main power switch.
– The main power switch is located
inside the machine. Open the
front door and left door to reach
it.
Reminder
If the machine is under control of the Weekly Timer function, turning off
the power will deactivate the function.
Be sure not to turn off the main power switch in usual operation.
When turning the main power switch off then on, be sure to wait 10 sec-
onds or longer before turning it on again; otherwise the machine may not
operate properly.
2-24
Preparation for Use
bizhub PRO 920