Konica Minolta bizhub Pro 920 User Manual page 444

16
– The following settings are used unless otherwise specified by the
printer driver.
01 PDL: Select the page description language to be initially used.
02 Paper Feed Tray: Select the paper feed tray to be initially used.
03 Output Tray: Select the exit tray to be initially used.
04 Duplex: Select to allow double-sided printing.
05 Binding: Select the binding position to be initially used in double-
sided printing.
06 Staple: Select the staple position to be initially used.
07 Punch: Select the punch position to be initially used.
08 Fold/Trimming: Select the initial setting for each function.
09 Offset: Select to use the offset function.
10 Output Order: Select to exit face up or face down in initial state.
11 Image Order: Select the print page order in initial state.
12 Print Number: Specify the print quantity in initial state.
13 Sort: Select to use the Sort mode.
14 Paper Size: Select the paper size to be initially used.
15 Orientation: Select the orientation of the image printed on copy
paper.
16 Banner Option: Select to print the banner page.
17 Banner Tray: Select the paper feed tray for printing banner page.
18 Convert Paper Size: Select to change the paper size.
19 Combination: Specify the desired combination function.
20 Booklet: Select to use the Booklet function.
21 Adhesive Binding: Select to use the Adhesive binding mode.
22 Print Position: Select the initial print position.
– Touch [Return] to complete the setting and restore the Printer Set-
ting Screen.
6
Perform the PCL Setting.
– Touch [02 PCL Setting]. The PCL Setting Screen will be displayed.
16-14
Controller Setting
bizhub PRO 920