Empty Waste Basket Of Z Folding Unit Zu-601/602; To Empty Waste Basket - Konica Minolta bizhub Pro 920 User Manual

Supplies & Handling
4.7

Empty Waste Basket of Z Folding Unit ZU-601/602

Z folding unit ZU-602 is installed on the right side of Finisher FS-509/FS-604.
If the waste basket of the Z folding unit becomes full, "Waste basket of
Punch unit is full / Please empty waste basket" message will be displayed on
the touch panel, and the finished set will be output without being punched
even if Punch mode has been specified.
Before setting Punch mode, be sure to check the waste paper inside the
waste basket, and empty the waste basket if needed.

To empty waste basket

1
Open the Z folding unit front door
with the Finisher door handle.
2
Withdraw the waste basket.
bizhub PRO 920
4
4-27