Konica Minolta bizhub Pro 920 User Manual page 361

Finishing / Paper Fold
– Touch [OK] to return to the Finishing setting menu.
Do you want to restore the previous setting?
?
% Touch [Cancel].
How does the [Off] key function?
?
% Touching [Off] will release the Finishing function without cancelling
newly specified information.
4
Touch [OK] on the Finishing setting menu.
The Basic Screen will be restored.
Note
If no other settings are required, you don't have to touch [OK] to restore
the Basic Screen. Position originals, then press [Start] to start the printing
job.
Reminder
The primary (main) tray gradually goes down while printed materials out-
put. DO NOT allow any object to interfere with the operation of the tray
on the left side of the finisher, as any interference may cause damage to
the finisher.
bizhub PRO 920
12
12-27