To Position Originals In Z-Folded Mode - Konica Minolta bizhub Pro 920 User Manual

8

To position originals in Z-Folded mode

Z-Folded original mode detects the folded original size without using the size
detection sensor of the ADF.
0 Before placing originals in the tray, be sure the document feeder is closed
fully.
1
Arrange originals in order.
2
Position original(s) FACE UP in the document feeder tray.
– Place two-sided originals with page one FACE UP. Up to 100 orig-
inals can be set at a time.
3
Adjust paper guides.
Reminder
Do not set more than 100 originals or over the limit line indicated on the
paper guides; otherwise a paper misfeed will occur.
Once closed, do not open the document feeder, otherwise the selected
copy conditions may be altered automatically.
!
Detail
To use the Z-Folded mode, see procedure on page 10-15.
For available original sizes in Z-Folded mode, see "ADF Originals" on
page 3-12.
8-14
Before Making Copies
bizhub PRO 920