Konica Minolta bizhub Pro 920 User Manual page 796

Hide thumbs Also See for bizhub Pro 920:

Table of Contents

This screen appears when you click [Reset] under the [Maintenance] menu.

Restart on the network section to enable new parameters. In this case, the

controller will be initialized, however the main body will not.

If you want to initialize the main body after resetting the network, wait un-

til the controller restarts (about 2 minutes) and turn the main power switch

OFF. Wait 10 seconds or longer before turning the device ON again.

It may take few minutes for resetting the network. After resetting the net-

work, you can access the network again. When you use the network, re-

start the Web browser.

Click the [Reset] button to restart the network only to enable new param-

PageScope Web Connection Setting

bizhub PRO 920

Troubleshooting