User Authentication/Account Track; General Settings>1 User Authentication - Konica Minolta bizhub Pro 920 User Manual

Hide thumbs Also See for bizhub Pro 920:

Table of Contents

3 User Authentication/Account Track

1 General Settings>1 User Authentication

Establish the authentication settings by combining the following six ele-

User Authentication:

Enter the user name and the user password.

Account Authentication:

Enter the account password.

User/Account Auth. Connect:

When User Authentication and Account Authentication are set to ON and

User/Account Auth. Connect is set to ON, Account Authentication is not

required to enter.

Account Name:

Enter the account name. (Account Name cannot be selected when Ac-

count Authentication is set to Off.)

Password Input Timing:

Set the timing of entering the password.

Account Distribute Number:

Enter the number of accounts. The total number of authentication to be

distributed is 1,000 for both a user and an account. The remaining

number from which the number of accounts is subtracted from 1,000 will

be distributed as user authentication.

It is recommended to distribute authentication for both the user and the

account, otherwise either party cannot be assigned authentication if it is

distributed to only one party.

Press the [Utility/Counter] to display the Utility Screen.

Touch [6 Administrator Setting], enter the administrator password, and

then touch [OK].

The Administrator Setting Screen will be displayed.

Utility <Administrator Setting>

bizhub PRO 920