Advanced Information
14
Advanced Information
14.1
Checking Feature Selections by Proof Copying
Use Proof copy to produce a sample of the copied set before making multi-
ple copies. This is a convenient and cost effective way of viewing the results
of the copying selections.
To make a proof copy
0 Proof copy is available when using ADF, or when using Separate Scan
mode for multiple originals or originals to be scanned from original glass.
1
Select the desired copy conditions from the various setting screens,
then position originals in the ADF.
If Separate Scan mode has been used to scan all the originals into
memory, touch [Separate Scan] to exit the Separate Scan mode when
scanning is completed.
2
Press [Proof Copy] on the control
panel.
A sample copy will be output while
scanning originals in the ADF.
If Separate Scan mode has been
used, a sample set will be delivered
immediately.
The screen for checking the job set-
tings will be displayed.
bizhub PRO 920
14
14-3